| Product code : |
sk31 |
| Price : |
340 baht / bag
|
| Using quantity : |
As a structural adhesive for:
Concrete elements
Hard natural stone
Ceramics, fibre cement
Mortar, Bricks, Blocks, Masonry etc.
Steel, Iron, Aluminium
Wood
Polyester, Epoxy
Glass
As a fast setting repair mortar for:
Corners and edges
Hole and void filling
Joint arrises
Joint filling and crack sealing:
Rigid joint filling
Crack filling and sealing (non moving)
|
Sikadur®-31 Normal is a solvent-free, moisture tolerant, thixotropic, structural two
part adhesive and repair mortar, based on epoxy resins and special fillers, designed
for use at temperatures between +10°C and +30°C.
How to apply
Concrete, mortar, stone, bricks:
Substrates must be sound, dry, clean and free from laitance, ice, standing water,
grease, oils, old surface treatments or coatings and all loose or friable particles
must be removed to achieve a laitance and contaminant free, open textured
surface.
Steel:
Must be cleaned and prepared thoroughly to an acceptable quality i.e. by
blastcleaning and vacuum. Avoid dew point conditions.
Other surfaces (polyester, epoxy, glass, ceramic):
On these substrates pre-apply Sikafloorr®-156 (primer) and then, ย“wet on wetย“ apply
Sikadur®-31 Normal.
Technical Data
Sikadur®-31 Normal has the following advantages:
Easy to mix and apply
Suitable for dry and damp concrete surfaces
Very good adhesion to most construction materials
High strength adhesive
Thixotropic: non-sag and suitable for vertical and overhead application
Solvent free
Hardens without shrinkage
Different coloured components (for mixing control)
No primer needed
High initial and ultimate strengths
Good abrasion resistance
Adhesive and filler in one
Impermeable to liquids and water vapour
Good chemical resistance
