HICEM Flex-Power Latex Adhesive Emulsion (Bonding agent)

special design, maintenance, renovation or structural modification that needs high-bonding result.

• Surface preparation 

Working surface should be clean and dry. HICEM Flex-Power Latex Adhesive Emulsion In case of supreme bonding requirement, HICEM Flex Adhesive Emulsion is able to use directly without any additional of water. Whatever, it is able to dilute HICEM Flex-Power Latex Adhesive Emulsion with pure water in a portion of 3:1 for easier workability. 

• Maintenance concrete or mortar surface:-

1. Brush HICEM Flex-Power Latex Adhesive Emulsion onto working surface and allow it to dry for at least 60 minutes or until white latex texture appears clear. (24 hrs. left bring about to commonly work)
2. Creating the mortar is a simple three step process:

     (a) Combine cement and dry sand together: one (1) part cement to three (3) parts sand. Set aside.

     (b) Mix one (1) part HICEM Flex-Power Latex Adhesive Emulsion with three (3) parts pure water. 

     (c) Combine (a+b) the cement-sand mixture with the adhesive emulsion mixture in a ratio of three (3)   

         parts cement to one (1) part emulsion.

1. Using a trowel, apply the mixture evenly over the working surface to a thickness of 10-15 mm.at least. 

-   Redecorate over the old tile

1.Brush HICEM Flex-Power Latex Adhesive Emulsion onto the old tile or concrete surface and allow it  to dry for at least 60 minutes or until white latex texture appears clear.

2.Creating the mortar is a simple three step processes:

(a) Combine cement and dry sand together: one (1) part cement to three (3) parts sand. Set aside.

(b) Mix one (1) part HICEM Flex-Power Latex Adhesive Emulsion with three (3) parts pure water.

(c) Combine (a+b) the cement-sand mixture with the adhesive emulsion mixture in a ratio of three (3) parts cement to one (1) part emulsion.

3.Using a trowel, apply the mixture evenly over the working surface to a thickness of approximately 3-5 mm.

4.Press the tile firmly into the cement mortar insuring the tile is fully attached with exceptionally large   

    tiles. It is recommended that the cement mortar be equally applied to the back of the tile to insure    

    supplement bonding. 

Integral special design enhances the beauty of your project and increases property value. HICEM Flex-Power Latex Adhesive Emulsion is simply upgrade ordinary work in such an easy direction.

1.To attach materials onto any kind of substrates such as concrete/mortar, glass, wood, gypsum, PVC or  

others. First step is to coat HICEM Flex-Power Latex Adhesive Emulsion on its surface the same as describe above (concrete maintenance and redecoration direction). Leave it about 20-30 mins.

2.Put mortar which is already mixed with emulsion on the substrates. Be sure that mortar thickness is 

proper to the attached materials' size and should not less than 5 -10 mm.

3.Press the materials into mortar texture.

4. Arrange as desire. 

To plaster on wall, foundation pile or other surfaces that thin-layer is required. Achievement is possible by HICEM Flex-Power Latex Adhesive Emulsion mixes with Portland-sand combination. This is also given good performance in long period of time. 

Deformability/flexibility >5 mm. (EN 12002) 

Shear adhesion strength 28 days 11.70 kgf/cm2 (EN 1324) 

Bond strength 28 days 24.30 kgf/cm2 (ASTM C882-91)

Compressive strength 28 days 354.10 kgf/cm2 (ASTM C109-80)